| Brand Name of the company-manufacturer. | AOC |
| Model Designation of the model. | M2470SWH |
| Model year The year in which this model was announced. | 2015 |
Display
No matter how hard I try to admire the good qualities of AOC's latest thin-bezel monitor, the overall feeling I have is no different than the one I get at Burger King or (as the title implies) when making my way through Aperture Science. AOC I2367FH Full Specifications: Built-in USB hub: no, DVI Port: no, HDCP: yes, HDMI ports quantity: 1, HDMI version: 1.4, VGA (D-Sub) ports quantity: 1, Supported. Refresh rate: 60 Hz. Screen size: 23 in. Aspect ratio: 16. Display technology: LED. Response time: 5 ms. Panel design: Flat. Go to full specs. Shop now at Amazon. Windows device driver information for AOC 831W. Professionals in the information technology sector rely on HP quality in order top ensure maximum productivity. As the power of processors, applications, memory adapters and storage devices increases, high end PC users are looking for ways to optimize the performance of their systems.
Information about the main characteristics of the display - panel, backlight, resolution, refresh rate, etc.
| Size class Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches. | 23.6 in (inches) |
| Diagonal Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen. | 599 mm (millimeters) 59.9 cm (centimeters) 23.5827 in (inches) 1.9652 ft (feet) |
| Width Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio. | 521.28 mm (millimeters) 52.128 cm (centimeters) 20.5228 in (inches) 1.7102 ft (feet) |
| Height Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio. | 293.22 mm (millimeters) 29.322 cm (centimeters) 11.5441 in (inches) 0.962 ft (feet) |
| Panel manufacturer Name of the manufacturer of the display panel. | Innolux |
| Panel model Information about the model of the panel used. | M236HJJ-??? |
| Panel type There are various panel technologies. Each has its own specific features - viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used. | Super MVA |
| Panel bit depth The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively. | 8 bits |
| FRC Frame Rate Control (FRC) is a method, which allows the pixels to show more color tones. With quick cyclic switching between different color tones, an illusion for a new intermediate color tone is created. For example, by using FRC, a 6-bit display panel is able to show 16.7 millioin colors, which are typical for 8-bit display panels, and not the standard 262200 colors, instead. There are different FRC algorithms. | No |
| Colors The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC. | 16777216 colors 24 bits |
| Aspect ratio The ratio between the horizontal and the vertical side of the display. Final fantasy ix android. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10. | 1.778:1 16:9 |
| Resolution Information about the number of pixels on the horizontal and vertical side of the screen. A higher resolution allows the display of a more detailed and of higher quality image. | 1920 x 1080 pixels Full HD / 1080p |
| Pixel pitch The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen. | 0.272 mm (millimeters) 0.0272 cm (centimeters) 0.0107 in (inches) 0.0009 ft (feet) |
| Pixel density Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases. | 93 ppi (pixels per inch) 36 ppcm (pixels per centimeter) |
| Display area The percentage of the approximate area, taken by the active part of the screen, to the total front area. | 81.92 % (percent) |
| Backlight The backlight is the source of light of the LCD display panels. The type of backlight determines the image quality and the color space of the display. There are various backlights such as CCFL, LED, WLED, RGB-LED, and etc. | W-LED |
| NTSC (1953) The NTSC (1953) color space is introduced in 1953 by the FCC with the appearance of color television and has a wider gamut than the sRGB. | 72 % (percent) |
| Brightness Information about the brightness of the screen. It is measured in candela per square metre (cd/m²). | 250 cd/m² (candela per square meter) |
| Static contrast The static contrast shows the ratio between the brightest and the darkest color, which the display can reproduce simultaneously, for example, within one and the same frame/scene. | 3000 : 1 |
| Dynamic contrast The dynamic contrast shows the ratio between the brightest and the darkest color, which the display can reproduce over time, for example, in the course of playing a video. | 50000000 : 1 |
| Horizontal viewing angle Information about the maximum horizontal viewing angle, within which the image on the screen is of acceptable quality. | 178 ° (degrees) |
| Vertical viewing angle Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality. | 178 ° (degrees) |
| Minimum response time Information about the minimum amount of time, in which the pixels change from one color to another. Very often the manufacturer provides the response time for transition from grey-to-grey (G2G). | 5 ms (milliseconds) 0.0050 s (seconds) |
| Coating Information about the type of coating of the display. There are different types of matte and glossy coatings, each of which has its own advantages and drawbacks. | Anti-glare/Matte (3H) |
| 3D Information on whether 3D is supported or not. | No |
Frequencies
Information about the horizontal and vertical refresh rates/frequencies.
| Horizontal frequency (digital) The horizontal scan rate/frequency shows the number of horizontal lines, displayed by the monitor per second, when it is plugged to a digital source. Cardfive vision id card design software, free download. | 30 kHz - 83 kHz (kilohertz) |
| Vertical frequency (digital) The vertical frequency/refresh rate shows how many times in a second the image on the screen is refreshed. | 50 Hz - 76 Hz (hertz) |
| 110V Permissible voltage tolerance in a 110-volt electric system. | 100 V - 120 V (volts) |
| 220V Permissible voltage tolerance in a 220-volt electric system. | 220 V - 240 V (volts) |
| Alternating current frequency Requirement regarding the alternating current frequency in the electric system. | 50 Hz - 60 Hz (hertz) |
| Electric current (A) Requirement regarding the electric current rating in amperes (A) of the electric system. | 1.31 A (amperes) |
| Power consumption (off) Power consumption in off-mode. | 0.37 W (watts) |
| Power consumption (sleep) Power consumption in sleep/stand by/suspend mode. | 0.5 W (watts) |
| Power consumption (eco) Average power consumption in economy mode. | 18 W (watts) |
| Power consumption (average) Average power consumption in standard work mode. | 24 W (watts) |
Dimensions, weight and color
Information about the dimensions and the weight of the specific model with and without stand as well as the colors, in which it is offered to the market.
| Width Width without stand in different measurement units. | 551.4 mm (millimeters) 55.14 cm (centimeters) 21.7087 in (inches) 1.8091 ft (feet) |
| Height Height without stand in different measurement units. | 338.4 mm (millimeters) 33.84 cm (centimeters) 13.3228 in (inches) 1.1102 ft (feet) |
| Depth Depth without stand in different measurement units. | 53.4 mm (millimeters) 5.34 cm (centimeters) 2.1024 in (inches) 0.1752 ft (feet) |
| Weight Weight without stand in different measurement units. | 3.4 kg (kilograms) 7.5 lbs (pounds) |
| Width with stand Width with stand in different measurement units. | 551.4 mm (millimeters) 55.14 cm (centimeters) 21.7087 in (inches) 1.8091 ft (feet) |
| Height with stand Height with stand in different measurement units. | 400.4 mm (millimeters) 40.04 cm (centimeters) 15.7638 in (inches) 1.3136 ft (feet) |
| Depth with stand Depth with stand in different measurement units. | 221 mm (millimeters) 22.1 cm (centimeters) 8.7008 in (inches) 0.7251 ft (feet) |
| Weight with stand Weight with stand in different measurement units. | 4.9 kg (kilograms) 10.8 lbs (pounds) |
| Box width Width of the package in different measurement units. | 620 mm (millimeters) 62 cm (centimeters) 24.4094 in (inches) 2.0341 ft (feet) |
| Box height Height of the package in different measurement units. | 435 mm (millimeters) 43.5 cm (centimeters) 17.126 in (inches) 1.4272 ft (feet) |
| Box depth Depth of the package in different measurement units. | 127 mm (millimeters) 12.7 cm (centimeters) 5 in (inches) 0.4167 ft (feet) |
| Box weight Weight of the product with all accessories and packaging in different measurement units. | 5.21 kg (kilograms) 11.49 lbs (pounds) |
| Colors Information about the colors, in which the specific model is offered to the market. | Black |
| VESA mount Information about whether there is a possibility for wall mounting according to the VESA Mounting Interface Standard (MIS). | Yes |
| VESA interface There are many various interfaces under the VESA standard, which differ in the size of the brackets, the distances between the screw holes and their number. | 100 x 100 mm |
| Removable stand Information about whether the stand can be dismounted. Usually, this is required for wall mounting. | Yes |
| Height adjustment Information about whether the stand allows height adjustment. | No |
| Landscape/portrait pivot Some displays have the ability to operate in landscape and portrait mode alike. | No |
| Left/right swivel Information whether the display can be swiveled around the stand axis. | No |
| Forward/backward tilt Most displays have the ability to be tilted forward and backward as to provide a more comfortable viewing position for the user. | Yes |
| Forward tilt Maximum degree of forward tilting of the display. | 5 ° (degrees) |
| Backward tilt Maximum degree of backward tilting of the display. | 25 ° (degrees) |
Aoc Computer Monitor
Audio
Information about the audio system - number and power of the built-in speakers, supported audio technologies.
| Speakers The speaker is a device, which converts electrical audio signals into acoustic vibrations resulting in corresponding sounds. | 2 x 2 W (watts) |
| Camera Information whether the current model has a built-in camera or not. | No |
/cdn.vox-cdn.com/uploads/chorus_image/image/56773853/483264_373423_01_front_zoom.0.jpg "Calibration")
Connectivity
Available connectivity ports, slots and interfaces.
| Connectivity Information about the available connectivity ports, slots and interfaces such as USB, infrared port, SD card slot, audio/video and network interfaces, etc. | 2 x HDMI 1.4 1 x D-sub 1 x 3.5 mm Audio In 1 x 3.5 mm Audio Out |
| High-bandwidth Digital Content Protection (HDCP) |
| Certificates, standards and licenses List of the standards, certificates and licenses supported/received by the current model. | CE EAC ENERGY STAR 6.0 Epeat Silver TCO 6 |
Operating and storage conditions
There are certain requirements for the environmental conditions, in which the display should be used and stored in order to function properly.
| Operating temperature The operating temperature shows the safe temperature range (from minimum to maximum), within which the display will function flawlessly. Outside this range it might operate improperly and/or fail entirely. | 0 °C - 40 °C (degrees Celsius) 32 °F - 104 °F (degrees Fahrenheit) |
| Operating humidity The operating humidity shows the acceptable level of humidity, in which the display will function flawlessly. It sets a lower and an upper humidity level for safe operation and is measured in percentage. | 10 % - 85 % (percent) |
| Operating altitude The operating altitude shows the maximum admissible altitude, at which the display will function flawlessly. Above this level it might not operate properly and/or might seize to function. | 5000 m (meters) 16404.2 ft (feet) |
| Storage temperature The storage temperature shows the range from a minimum to a maximum temperature, within which storing of the display is considered to be safe. | -25 °C - 55 °C (degrees Celsius) -13 °F - 131 °F (degrees Fahrenheit) |
| Storage humidity The storage humidity shows the lower and upper humidity limit, which ensures safe storage of the display. Storing it outside these limits might damage the display. | 5 % - 93 % (percent) |
| Storage altitude The storage altitude shows the maximum possible altitude for secure storing of the display. Storing it above this limit may result in damaging the display. | 12192 m (meters) 40000 ft (feet) |
| Accessories Information about some of the main accessories included in the standard packaging of the current model. | Audio cable D-sub cable HDMI cable |
Additional features
Information about other features.
| Additional features Information about other features of the current model, which are important and have to be specified. | Security lock slot |
Aoc 831w Monitor Specs Guide
Frequently asked questions
Aoc Monitor Troubleshooting
- Why does white not look white in my picture?
- Monitor power-light indicator flashes from green to orange constantly and there is nothing on the display. What is the reason of this?
- Is there anyway I can adjust the blurriness on my screen?
- Why does the display on my monitor appear to flicker, bounce or wave?
- How can I minimize the flicker on my screen?
- My screen has gone completely black but the power light is still on (green). What is the reason of this?
- What is the Pixel Policy AOC is offering?
- Why is the display of my monitor blurred or unfocused?
- Monitor displays an “Out of Range” message. What does it mean?
- Why is the Plug & Play function of my monitor not working?
- Why is the power light on my monitor not coming on?
- Why is my computer showing “Adapter default” and “Optimal” as the only options on my refresh rate list?
- How can I obtain parts for my out of warranty monitor?
- I’m using a MAC computer. Do I need to use an adapter? If so, what settings do I use on the adapter?
- Which AOC Monitor products are compatible with VESA® FPMPMI wall mounting standard?
- Why does my monitor display “Input Not Supported”? (LCD monitor only)
Adjust H-Position and V-Position or press hot-key (AUTO).
Check to see that the computer is not on power-saving mode by pressing any key or moving the mouse. Then if there is still no display, this typically indicates that the monitor is not receiving a video signal from the video card in your computer. You should verify this by trying the monitor on a different working system, when you plug the monitor into the computer you should get a display…if the monitor still doesn’t show an image on the different system, this indicates an internal problem with the monitor. Please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support.
These problems are caused by using an extension video cable or switch box. You need to plug the monitor's video cable directly to the video card connector on the back of your computer to obtain the best picture quality from the monitor. Also make sure that all the pins of the monitor's video cable are in good condition.
Check the pin connector of your monitor video cable, verify that there are no damaged or bent pins, if everything looks fine; then this would indicate a failure inside the monitor. Please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support.
No. You should try to activate the Auto-Adjust feature. If this does not work, please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support.
Use the Windows Shut Down screen and activate the AUTO-ADJUST feature of your monitor. You can display the Windows Shut Down screen by pressing START & then Shut Down. After the monitor has performed AUTO-ADJUST, press CANCEL to return to your regular desktop. Refer to the monitor's documentation for instructions on how to activate the Auto-Adjust feature.
For all Windows Operating systems: Go to START button, click on SETTINGS, click on Control Panel. Select the Power Management icon. Under Power Schemes drop-down menu, select - ALWAYS ON.
Your computer may be in screen saver mode, it has instructed the monitor to go to power saving mode, or the the monitor's video cable is not properly connected to the computer.
Another possible cause of this is a locked-up or in-operative computer since the computer is what supplies the monitor with all the display data or information. Move the mouse or press a key to de-activate the screen saver or power saving mode. Check the monitor's video cable and make sure it is snugly connected to the computer.
To see if the computer is operating properly, press the CAPS LOCK key on the keyboard repeatedly while checking the CAPS LOCK light. If the light is not turning ON & OFF, the computer is non-functional. Contact your computer manufacturer for help.
Press the Start button and highlight the “Settings” option.Select the “Control Panel” folder.
Double Click on the “Display” icon on the Control Panel.
Select the “Settings” tab under the “Display Properties” window.
Click on the “Advanced” button.
Click on the “Adapter” tab and you can check, or set the refresh rate from there.
Since your video card is located inside your computer, you will have to contact your computer manufacturer for assistance.
You can find this on a small white sticker label on the back of the monitor.
You can use Windex® to clean the screen and 409® clean the outer casing of the monitor. Please use a 'soft' non-fiberous cloth to clean the screen. Do not use any paper products to clean the screen.
Aoc 831w Driver
- Why is there no driver for WINDOWS NT?
- Do you have drivers for Windows ME?
- Do you have drivers for Windows XP?
- Do you have drivers for Windows Visa?
- Do you have drivers for Windows 7?
- Do you have drivers for Windows 8?
- Do you have drivers for the Mac? Cisco usb driver windows 10. Your monitor is Plug and Play with the Mac OS operating system. If you do find any issues during installation, please contact Mac' s="" technical="">
- Do you have drivers for Windows XP?
Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
Double click on the 'Display' Icon.
Select the 'Settings' tab then click on 'Advanced..'.
Select the 'Monitor' button, then click on 'Change..' button.
Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button.
Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click on 'Next' and then click on 'Have Disk..'.
Click on the 'Browse..' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button.
Click on the 'OK' button, select your monitor model and click on the 'Next' button.
Click on 'Finish' button then the 'Close' button.
Double click on the 'Display' Icon.
Select the 'Settings' tab then click on 'Advanced..'.
Select the 'Monitor' button, then click on 'Change..' button.
Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button.
Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click on 'Next' and then click on 'Have Disk..'.
Click on the 'Browse..' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button.
Click on the 'OK' button, select your monitor model and click on the 'Next' button.
Click on 'Finish' button then the 'Close' button.
Click on the 'Display' Item.
Select the 'Settings' tab then click on the 'Advanced' button.
Select 'Monitor' tab
- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.
- If the 'Properties' button is active, click on 'Properties' button.
Click on the 'Driver' tab and then click on 'Update Driver..' button.
Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button.
Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button.
Click on the 'Have disk..' button, then click on the 'Browse..' button and then select the appropriate drive F: (CD-ROM Drive).
Click on the 'Open' button, then click the 'OK' button.
Select your monitor model and click on the 'Next' button.
- If you can see the 'has not passed Windows® Logo testing to verify its compatibility with Windows® XP' message, please click on the 'Continue Anyway' button.
Click on the 'Finish' button then the 'Close' button.
Click on the 'OK' button and then the 'OK' button again to close the Display Properties dialog box.
Click 'Personalization' and then 'Display Settings'.
Click 'Advanced Settings..'.
Click 'Properties' in the 'Monitor' tab. If the 'Properties' button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is.
If the message 'Windows needs..' is displayed, as shown in the figure below, click 'Continue'.
Click 'Update Driver..' in the 'Driver' tab.
Check the 'Browse my computer for driver software' checkbox and click 'Let me pick from a list of device drivers on my computer'.
Click on the 'Have disk..' button, then click on the 'Browse..' button and then select the appropriate drive F:Driver (CD-ROM Drive).
Select your monitor model and click on the 'Next' button.
Click 'Close' → 'Close' → 'OK' → 'OK' on the following screens displayed in sequence.
Click on the 'Display' icon.
Click on the “Change display settings” button.
Click the “Advanced Settings” button.
Click the “Monitor” tab and then click the “Properties” button.
Click the “Driver” tab.
Open the 'Update Driver Software-Generic PnP Monitor' window by clicking on “Update Driver.. “and then click the 'Browse my computer for driver software' button.
Select 'Let me pick from a list of device drivers on my computer'.
Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:Drivermodule name (where X is the drive letter designator for the CD-ROM drive).
Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk drive.
Close all open windows and remove the CD.
Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.
Select 'Let me pick from a list of device drivers on my computer'.
Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:Drivermodule name (where X is the drive letter designator for the CD-ROM drive).
Select the 'xxx.inf' file and click the “Open” button. Click the “OK” button.
Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk drive.
Close all open windows and remove the CD.
Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.
Double click on the 'Display' Icon.
Double click on the 'Display' Icon.
Select the 'Settings' tab then click on 'Advanced..'.
Select 'Monitor'
- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.
- If the 'Properties' button is active. Click on 'Properties' button.
Click on 'Driver' and then click on 'Update Driver..' then click on the 'Next' button.
Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on 'Next' and then click on 'Have disk..'.
Click on the 'Browse..' button then select the appropriate drive F: ( CD-ROM Drive).
Click on the 'Open' button, then click the 'OK' button.
Select your monitor model and click on the 'Next' button.
If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button.